At 10-Spot Tools, we print the Jonah Pope Slimline Drawer inserts as single parts!
This insert has room for:
- M12 Soldering Iron (2488)
- 1 Small format M12 Battery
- Multiple Soldering Tips
- Solder
- Soldering Paste
- 4 Large Divided Storage Spots
- 8 Small Divided Storage Spots
It fits in:
- 2-Drawer Packout (1/3 of 1 drawer) (48-22-8442)
- 3-Drawer Packout (1/3 of 1 drawer) (48-22-8443)
From the designer:
This is a custom insert that I have designed to fit your Milwaukee Packout Drawers to store your M12 Soldering Iron and accompanying kit in the Milwaukee 2 & 3 Drawer units (48-22-8443 & 48-22-8442).
The specific M12 Tool that this is designed for is model 2488-20, link is provide here: https://www.milwaukeetool.com/Products/2488-20
Features - Super Flexible Design
-
Multilayered Storage - The design consists of two layers, a bottom layer to store all your supplies/hardware and a top layer that stores your tool, batteries and large items. The top layer simply drops in on top of the bottom layer and sits in place thanks to tabs I've designed into the parts.
-
Maximum Storage Space - x3 Files variants included to support the left, middle or right section of the drawer (pre-split or single part print files included for each). These files custom designed to each section of the drawer ensure you maximise the usable storage space.
-
2 & 3 Drawer Support - The inserts have been designed to be compatible with both the 2 and 3 Drawer Packout units. They will be most effective when used in the 3 Drawer units as that is what the depth of the insert has been based on, although they will still fit the 2 Drawer if you'd prefer.
Slimline - The Super Compact Modular Drawer System!
My "Slimline" Packout Drawer system is dedicated to storing the slimmer tools in your kit. Drawer inserts for wider tools like the M12 Pin Nailer require half the drawer. Whereas more compact tools like the M12 Soldering Iron can fit in a much smaller footprint. With these 2 systems, you can truly maximise every part of your drawers!
I developed this extra system to work in addition to my larger Drawer inserts that support those wider tools that require half the drawer. Each new tool insert designed for the "Slimline" range will have 3 custom file variations included to accommodate your insert on either the left, middle or right section of the drawers.
Important Notes:
-
Stock Milwaukee Drawer Dividers - Since this is a fully custom contained storage system, there's no need for the stock Milwaukee Drawer Dividers. These dividers would waste space which would allow for expanded storage space inside the inserts. Please remember that you can't use these inserts and the stock dividers at the same time.
-
Slimline VS my Standard Drawer Inserts - As the "Slimline" Inserts split the drawer into thirds this won’t be cross compatible with larger drawer inserts that split the drawer into halves if they’re in the same drawer. Simply designate a drawer for containing Slimline or Standard drawer inserts. Designs for the “Slimline” system are labelled with the blue logo seen on the thumbnail or in the title above.